Gear Head Gap Bed Lathe CQ6236D 1000X360

1.  No change gear in tool box

2. The thread category completes not only cutting metric thread and imperial thread, but also cutting diametric thread and module thread.

3. Head stock gears are made of high quality steel ground and hardened.

4. Two different length beds are available :750mm or 1000mmm

5. Minimum cross feed 0.01mm/rev, minimum longitudinal feed 0.046mm/rev

6. With or without foot stand for optional

7. Right angle appearance or circular appearance for optional.

New model Precision Gear-Head gap bed Lathe complete with many features including 360mm swing over bed and 52mm spindle bore.

Ideal for any training workshops, repair shops, workshops and many other uses.Machine can cut 4 kinds of threads. Metric, inches,diametrical and module pitches.Complete with machine stand.Large 52mm spindle bore.Spindle nose fixture D1-5Automatic cross and longitudinal feeds.Induction hardened bed-ways.Hardened and polished gears.Complete with all safety features.Includes foot brake, coolant system, worklight and many accessories.Removable gap-bed for larger diameters.Removable chip tray.Cat iron machine stand for more rigidity and precision.Supplied in single phase or 3 phase.   

• High Precision Japanese NSK Tapered Roller Bearings used in spindle, for the ultimate in long life, high precision, and best surface finishes
• 4-bolt Centering Provision (Known as a Spider) Included at outboard end of spindle, great for through spindle work, such as Gunsmithing or support other long parts that extend through the spindle bore
• Standard 3 jaw chuck has reversible bolt on jaws, for faster changing from O.D. to I.D. Holding
• D1-5 CAMLOCK SPINDLE MOUNT, with LARGE 2" Spindle Bore, Best in class for universal chuck mounting, and the ability to accept larger diameter work that can pass through the spindle for much easier setup
• Excellent value for the price, includes many of the accessories people eventually add, such as the Wedge Type Quick Change Tool post Set, LED Work Light, and more at no additional charge, pre-installed on the machine and ready to use
• Hardened and Ground gears and shafts in headstock for longer life
• Power feed on Carriage, and Cross Slide, both left and right, and in and out, for both turning and facing operations with automatic feed. Allows for the best surface finish in all directions.
• 3 HP Single Phase motor, no need for any special power source, will run from standard 220V Single Phase Outlet
• Rigid Cast Iron Base Construction, for deeper cuts, and more vibration dampening
• Induction Hardened and Precision Ground Bed Ways to resist wear and give a long service life
• High quality electronics used throughout machine
• Slip Clutch on feed rod, to help prevent overloading damage of feeds and allow the use of a solid carriage stop for repetitive work
• Inch AND Metric thread cutting ability is a standard
• Minimal Change Gears needed for Inch threading, only 2 changes required for the full Inch threading range, one set covers 4-14 TPI, and the other set will cover the 16-112 TPI Range. Most gunsmithing work is covered in the 16-112 TPI Range, so normally, gear changes will not be required at all
• TRUE INCH PITCH main lead screw is 8 TPI, cross feed, tailstock, and compound slide lead screws are 10 TPI, which make it easier to use for the INCH measurement System
• Splash oil bath lubrication in Thread/Feed Gearbox, and Apron, for efficient lubrication, and long life, especially compared to traditional open-non lubricated Thread/Feed Gearbox design, yet simple and reliable, and does not require any filter changes or pump maintenance as with oil pump lubrication systems. Also no risk of losing oil flow to expensive parts as there can be with pump lubricated systems
• Longest in class, 3 Year Warranty for added piece of mind

Included Accessories:

• 8" 3 Jaw Chuck, with bolt on, reversible top jaws
• 8" 4 Jaw Chuck
• Wedge Type quick change tool post set with 5 holders (straight, straight with V Groove, Parting, Boring, and Knurling Holders)
• Universal Quick Change Threading Gearbox (minimal gear changes)
• 12" Face Place
• Coolant System
• Spider Bolts
• Steady Rest
• Follow Rest
• Foot Brake
• Coolant System
• LED Work Light
• Cast Iron Stand
• Reducing Sleeve for headstock (To use a center)
• (2) Centers (Non Rotating)
• 3 Year Warranty

INCH SYSTEM  LATHE 

2″ Spindle Bore, allows larger work through the headstockHigh Precision NSK Spindle BearingsAvailable With or Without DRO as shownMINIMAL CHANGE GEARS, Universal Quick Change Threading and Feed Gearbox, Only one gear change to cover the entire Inch and Metric Thread RangesBXA Quick Change Tool Post, Foot Brake, and much more included standard!Cast Iron base for extra rigidity220V Single Phase Power, no phase converters neededShort spindle length, 16-1/2″, great for gunsmithing operations through the headstockSpindle Spider included, built inTrue 4″ Travel Threading Dial - 32T Thread Dial Gear, 8TPI Leadscrew - Allows much easier threadingPriced very, very reasonably when compared with other similar models - And others are lacking the 2″ Spindle Bore, Wedge Type Tool Post, Cast Iron Base, and much moreLeadscrews Are True Inch Pitch Screws (Not Metric Conversions Like Many), 10 Threads Per Inch (.100" Per Turn)

 Specifications

Max. Swing over bed 14"Max. Swing over cross slide 8.77"Max. Swing in gap 19.75"Center Height 7"Spindle Center Line Distance from Floor Approx. 46"Max. Distance Between Centers 40"Spindle Chuck Mount D1-5, CamlockSpindle Face to Tail Stock Spindle Face Max Distance 43-1/4"Width of Bed 7.362"Bed Height 11.5"Spindle Bore 2"Spindle Taper, Internal MT #6Spindle Mounting System Camlock, D1-5Spindle Speeds 60-1800RPM, 8 StepsBed Length 54"Lead Screw Diameter / Pitch 7/8" / 8 TPIFeed Rod Diameter 3/4"Inch Thread Cutting Range 4-112 TPI, List: 4, 4.5, 5, 5.5, 5.75, 6, 6.5, 7. 8, 9, 9.5, 10, 11, 11.5, 12, 13, 14, 16, 18, 20, 22, 23, 24, 26, 28, 32, 36, 38, 40, 44, 46, 48, 52, 56, 64, 72, 80, 86,92, 96, 104, 112Metric Thread Cutting Range .1-7mm PitchLongitudinal Feed Range (Left and Right) .0016-.117 Inches Per RevolutionCross Feed Range (In and Out) .0005-.032 Inches Per RevolutionSpindle Length through headstock, Protruding End to Chuck Mounting face Approx. 17"Spindle Length through headstock, End to 3 Jaw Chuck face Approx. 19-3/4"Max Carriage Travel, Along Bed Ways 38-1/2"Cross Slide Travel 7"Compound Travel 3-3/4"Tail Stock Quill Taper MT #4Tail Stock Quill Travel 4"Tail Stock Quill Diameter Approx. 1.653″ Main Motor Horsepower 3HPSpeed Control Type Gear Shift LeversVoltage / Phase/ Amps 220 Volts +/- 10%, 1 Phase / 12 Amps Max.Max. Dimensions, Assembled (Includes cross slide handles) 51"H x 31"W x 71-1/2"LFoot Print (without Handles Included) 71-1/2"L x 24" Front of chip pan to back of splash guardApproximate Machine Weight, With Accessories and Base 1800 LBS (Cast Iron Base)

Two model size can be choose 
Main parameters